NSPanel Pro now supports Matter Bridge, allowing existing Zigbee and SONOFF WiFi devices to be synchronized with compatible ecosystems through a one-time pairing. Supported platforms include Apple Home, Google Home, Amazon Alexa, and Home Assistant. Rather than adding devices separately to each ecosystem, you can control synchronized devices in real time and use them in automations on third-party Matter platforms.
With v4.1.0, NSPanel Pro expanded beyond local control to serve as a central gateway for cross-ecosystem home automation. Device and feature availability depends on the versions and platform limitations below.
Version requirements and availability
- Synchronizing SONOFF WiFi devices to Apple Home requires eWeLink APP v5.22.0 and NSPanel Pro v4.2.0.
- Versions earlier than v5.22.0 support only Zigbee sub-device synchronization to Apple Home.
- For Android, eWeLink APP v5.22.0 is available to upgrade.
- For iOS, v5.22.0 is expected in January 2026.
Set up cross-ecosystem integration
Open the Matter Bridge entry and enable the Matter pairing code. You can access it on NSPanel Pro:
Alternatively, use either of the two Matter Bridge entry points in the NSPanel Pro settings interface within the eWeLink APP:
Pair NSPanel Pro with a third-party Matter platform. In Apple Home, scan the QR code or enter the numeric pairing code to add NSPanel Pro as a Matter Hub. Pairing is also available through Google Home or Alexa.
Synchronize sub-devices in a batch. Zigbee and SONOFF WiFi sub-devices can be synchronized only through the Matter Bridge entry in the eWeLink APP.
Check and control the synchronized devices. NSPanel Pro displays their names, ID numbers, and icons in real time.
Apple Home provides device controls and access to sub-device information.
Manage paired platforms
After pairing NSPanel Pro with a third-party Matter platform, open "Added Matter Platforms" to manage the connections.
- Select "Remove" to disconnect the corresponding platform.
- Select "Remove All" to disconnect every connected Matter platform.
Matter Bridge provides one-click local synchronization of supported Zigbee and SONOFF WiFi sub-devices, bringing their controls together within your chosen Matter ecosystem.
Product page: https://sonoff.tech/en-us/products/sonoff-nspanel-pro-smart-home-control-panel-120-type
Updates and feedback
V4.x updates and optimizations are ongoing, with improvements informed by user feedback. The roadmap page provides release updates and a place to report problems after upgrading. The development team can communicate directly with users there to help diagnose and resolve issues.
NSPanel Pro roadmap and upgrade feedback
Experiences and suggestions can also be shared in the NSPanel Pro community forum.
Supported devices and Matter capabilities
SONOFF Zigbee devices
| Device category | Models | Available capabilities and limitations |
|---|---|---|
| DIY smart switches | ZBMINI, BASICZBR3, ZBMINI-L, ZBMINL2, MINI-ZBRBS, ZBMicro, ZBMINIR2 | On/off control. |
| Smart wall switch | ZBM5 1C/3C | On/off control. |
| Sensors | SNZB-01, SNZB-01P | Click events. Google Home recognizes these as switch devices but cannot control them. Alexa does not support them. |
| Sensors | SNZB02DR2, SNZB-02D, SNZB-02WD, SNZB-02P, SNZB-02 | Temperature and humidity readings. Alexa does not support humidity. |
| Sensor | SNZB-02LD | Temperature readings. |
| Sensors | SNZB-03, SNZB-03P, SNZB-06P | Motion-detected and no-motion-detected states. |
| Sensors | SNZB-04, SNZB-04P | Open and closed states. |
| Sensor | SNZB-05P | Leak-detected and no-leak-detected states, plus battery level. Not supported in Alexa. |
| Home appliance | ZBCurtain | Open/close control, on/off status reporting, motor-position change reporting, and percentage control. Alexa supports pausing. Percentage control is inaccurate if the motor has not been calibrated. |
| Home appliance | TRVZB | On/off control, target-temperature setting, temperature reporting, and operating-mode selection: Manual Mode or Energy Saving Mode (Off Mode). |
| Home appliances | SWV-NH, SWV-BSP | Valve configuration and control, plus Flow Measurement (Server). Supported only in Google Home; Alexa, Apple Home, and Smartthings do not support the water-valve device type. |
| Smart plugs | S26R2ZB, S31 Lite ZB, S40ZB Lite, S60ZB Series | On/off control. |
Third-party Zigbee 3.0 devices
|
Category |
Device Type |
Capabilities in Matter Platform |
|
Plug |
Matter On/Off Plug-in Unit |
On/Off Control |
|
Switch |
Matter On/Off Plug-in Unit |
On/Off Control |
|
Sensor |
Motion Sensor |
Occupancy Sensing |
|
Electrical Sensor |
1.Electrical Power Measurement 2.Electrical Energy Measurement |
|
|
Vibration Sensor |
Occupancy Sensing |
|
|
Air Quality Sensor |
1.Air Quality 2.Temperature Measurement 3.Relative Humidity Measurement 4.PM2.5 Concentration Measurement 5.Total Volatile Organic Compounds Concentration Measurement 6.Carbon Monoxide Concentration Measurement 7.Carbon Dioxide Concentration Measurement |
|
|
Contact Sensor |
Boolean State |
|
|
Temperature Sensor |
Temperature Measurement |
|
|
Humidity Sensor |
Relative Humidity Measurement |
|
|
Light/Illumination Sensor |
Illuminance Measurement |
|
|
Smoke Sensor/ |
1.Smoke CO Alarm 2.Carbon Monoxide Concentration Measurement |
|
|
Water Leak Detector |
Boolean State |
|
|
Light |
Dimmable Light |
1.On/Off Control 2.Level Control |
|
Color Temperature Light; Extended color Light |
1.On/Off Control 2.Level Control 3.Color Control |
|
|
Color Dimmer Switch |
Generic Switch |
Switch |
|
Curtain |
Window Covering |
Window Covering |
|
Thermostat |
Thermostat |
1.Thermostat 2.Thermostat User Interface 3.Configuration 4.Energy Preference 5.Fan Control 6.Temperature Measurement 7.Relative Humidity Measurement 8.Occupancy Sensing |
|
Button |
Generic Switch |
Switch |
SONOFF WiFi devices
| Device category | Models | Available capabilities and limitations |
|---|---|---|
| DIY smart switches | BASICR2, BASICR4, RFR2, MINIR2, MINIR4, MINIR4M, 4CHR3, 4CHPROR3, POWR3, Micro, THR316/316D, THR320/320D, DUALR3 Lite, POWR316/POWR316D, POWCT, iFan04 | On/off control. |
| DIY smart switch | DUALR3 | Switch Mode provides on/off control. Motor Mode provides open/close control, on/off status reporting, motor-position change reporting, and percentage control. Percentage control is inaccurate without motor calibration. Status changes that occur while the device is offline do not automatically synchronize with Apple Home when it reconnects; restart the Matter hub. |
| Smart plugs | S26R2, S31, S31 Lite, S40TPB, S40TPA, S40TPB Lite, S40TPA Lite, S60TPF/TPG | On/off control. |
| Smart wall switches | TX1C/2C/3C, T5 Series, M5 Series | On/off control. |
| Central control panel | NSPanel | On/off control. |
| Wire splicing connector | D1 | On/off and brightness control. |
| Smart lighting | B02-F-A19/B02-F-A60 | On/off, brightness, and color-temperature control. |
| Smart lighting | B05-B-A60 | On/off, brightness, color-temperature, and color control. |
| Smart lighting | B05-BL-A60/B05-BL-A19 | On/off, brightness, and color-temperature control. |
